I've been wanting to do a tutorial ever since my tiny worlds were so well received during last January's Stashbusting. Sew Grateful week was just the kick in the pants that I needed to get this done. Let's make Tiny Worlds together!
Supplies:
A circle template (mine was about 7 1/2 inches)
Scissors and/or rotary cutter
Pins
Fabric for front and back
Yarn
Fabric scraps or markers for decorating
Ribbon for drawstring
![]() |
1. Trace and cut two circles on inside and outside fabric. |
![]() |
2. Create landscape. Use fabric markers first and iron down scraps of fabrics using double sided fusible. You could also use a print for your scenery. |
![]() |
Make sure you keep details 1/2 inch away from edges so they don't disappear in seam allowance. |
![]() |
Using three strands of yarn, (mine was that loose weave crewel yarn) layer it across area you wish for grass. |
![]() |
Using a very small stitch length sew as many rows as needed to attach the "grass". Carefully clip apart between stitch lines and all the loops. |
![]() |
Fluff grass with fingers revealing pattern underneath. Steam iron into shape if desired. |
![]() |
4. Pin right sides together and sew 1/4 inch seam, leaving an opening for turning. Don't worry about the poof in the middle just make the edges match up. Clip curves and turn right side out. |
![]() |
5. Press flat and top stitch close to the edge and a 1/4 inch away from edge stitch making sure buttonhole falls in between these lines. You've just made your drawstring casing! |
![]() |
6. Cut ribbon to fit around circle lying flat. Thread through and tie off close to opening. |
![]() |
Give it a pull and TaDa! You're done! |